Technics sx-PR604/M - Manual (Page 117)

ENVELOPE TOUCH & KEY FOLLOW
Specify how the volume changes relative to touch or note
pitch over time.
1. Use the PAGE buttons to view the 3/3 display.
2. Use the buttons to the left of the display to
select a tone.
3. Use the TOUCH
∧
and
∨
buttons to change
the touch settings.
• Use the ATK
∧
and
∨
buttons to specify the ATTACK
time change depending on touch. Use the DCY
∧
and
∨
buttons to specify the DECAY time change depending on
touch.
• At a – setting, the softer the keys are pressed, the greater
the change. At a + setting, the harder the keys are
pressed, the greater the change.
4. Change the key follow settings for the AT-
TACK, DECAY and RELEASE.
• Use the
∧
and
∨
buttons corresponding to the EN-
VELOPE KEY FOLLOW attributes to adjust the settings.
Use the RANGE buttons to specify the keyboard range.
LFO Edit
LFO can be applied to the pitch, amplitude, filter and/or pan to produce a cyclic modulation of the sound.
•
Twelve LFO groups can be used.
LFO
1. On the SOUND EDIT MENU display, select
LFO.
• The display looks similar to the following.
2. Use the PAGE buttons to select the respective
characteristics.
PAGE 1/4: PITCH (vibrato effect)
PAGE 2/4: AMP (tremolo effect)
PAGE 3/4: FILTER (wah-wah effect)
PAGE 4/4: PAN (auto pan effect)
3. Use the buttons to the left of the display to
select a tone.
4. Use the LFO SETTINGS
∧
and
∨
buttons to
adjust the respective assigned LFO’s.
• LFO which share the same number on other displays are
also changed with this adjustment.
SELECT
Select the assigned LFO number (1 to 12)
SPEED
Adjust the modulation speed.
KEYSYNC
When playing more than one note, specify whether the
LFO starts or not each time a key is pressed (ON/OFF).
• When KEYSYNC is set to ON: if, while playing one note,
you play a second note, the LFO is applied to the second
note as well.
PHASE
Degree of phase change.
5. Use the CONNECTION ON/OFF buttons to
specify whether or not the LFO is applied to
the tone.
• An arrow mark indicates that the LFO is applied.
6. Use the TONE SETTINGS
∧
and
∨
buttons to
adjust the respective parameters.
PHASE
Phase
• A + indicates normal phase, and a - indicates an inverted
phase.
WAVE
Modulate the waveform.
SIN: Sine wave
TRI: Triangle wave
SQR: Square wave
SAW: Saw tooth wave
DELAY
Delay time is the time elapsed from when the keyboard
key is pressed until the modulation begins.
DEPTH
Modulation depth
TOUCH
Degree of modulation change in relation to touch
7. Repeat steps 2 to 6 for the other tones, as
desired.
• You can press the OVERVIEW button to confirm the status
of each LFO setting.
S
o
un
d E
d
it
Part IX Sound Edit
117
QQTG0665