Timex 222-0950012 - Manual (Page 25)

FOLDOVER CLASP
BRACELET
1. Find spring bar that con-
nects bracelet to clasp.
2. Using a pointed tool, push
in spring bar and gently
twist bracelet to disengage.
3. Determine wrist size, then
insert spring bar in correct
bottom hole.
4. Push down on spring bar,
align with top hole and
release to lock in place.
43
ENGLISH
3) In the A.M., rotate the ring until the “S” (south)
marker is halfway between the hour hand and
12:00 (after the hour hand or within the shortest
distance between the hour hand and 12:00).
4) In the P.M., rotate the ring until “S” is before the
hour hand and halfway between the hour hand
and 12:00.
How to Adjust Bracelet
(Variations of the following bracelet sections apply to
all watch models).
SLIDING CLASP BRACELET
1 Open locking plate.
2. Move clasp to desired
bracelet length.
3. Exert pressure while holding
locking plate and slide clasp
back and forth until it
engages in grooves on underside of bracelet.
4. Press locking plate down until it snaps closed.
Clasp can be damaged if excessive force is used.
42
ENGLISH
Fig. 1
Fig. 2
Fig. 3
W223_Analog2_NA_EN.qxd 6/5/09 9:19 AM Page 42