Timex 222-0950012 - Manual (Page 22)

TIME
TO SET THE TIME:
NOTE: The stopwatch must be stopped and reset to
the zero position prior to setting the time.
1. Pull the crown out to position 2.
2. Rotate the crown either direction until the
24-hour, hour, and minute hands display the
correct time.
3. Push Crown in to position 1.
TO ADJUST THE STOPWATCH HANDS TO
THE ZERO POSITION:
1. Pull the crown out to position 2.
2. Press pusher “A” to move the stopwatch minute
and second hands counter clockwise to the zero
position. Press pusher “B” to move the stop-
watch minute and second hands clockwise to the
zero position.
3. Push Crown in to position 1.
37
ENGLISH
TYPE 4
BASIC OPERATIONS
• 6 o’clock eye displays “seconds elapsed” for the
chronograph
• 9 o’clock eye displays “minutes elapsed” for the
chronograph
• 3 o’clock eye displays the current time in a
24 hour format
36
ENGLISH
2 1
HOUR HAND
STOPWATCH
MINUTE HAND
STOPWATCH
SECOND HAND
SECOND HAND
PUSHER “A”
MINUTE HAND
CROWN
POSITION
NORMAL POSITION “1”
PUSHER “B”
24-HOUR HAND
W223_Analog2_NA_EN.qxd 6/5/09 9:19 AM Page 36