Toshiba TDP-P6 - Manual (Page 30)

30
Advanced menu
Sharpness : (video sources only) changes the clarity of the edges of a video
image. Select a sharpness setting.
Color Space : (computer sources only) allows you to select a color space
that has been specifically tuned for the input. When Auto is selected, the
projector automatically determines the standard. To choose a different set-
ting, turn off Auto, then choose either RGB, REC709 or REC601.
Color Temperature : changes the intensity of the colors. Select a listed set-
ting.
Color Control : allows you to individually modify each color. Highlight the
color, press Select, then use the arrows to adjust the value.
Video Standard : (video sources only) When it is set to Auto, the projector
attempts to pick the video standard automatically based on the input signal
it receives. (The video standard options may vary depending on your region
of the world.) If the projector is unable to detect the correct standard, the
colors may not look right or the image may appear “torn.” If this happens,
manually select a video standard by selecting NTSC, PAL, or SECAM from
the Video Standard menu.
Overscan : (video sources only) removes noise around the video image.
The following 4 options are for computer sources only.
Phase : adjusts the horizontal phase of a computer source.
Tracking : adjusts the vertical scan of a computer source.
Horizontal/Vertical Position : adjusts the position of a computer source.
Sharpness
Color Space
Color Temperature
Color Control
Video Standard