Technicolor - Thomson 210i - Manual (Page 37)

SpeedTouch 210i
33
Each LAN-to-LAN profile includes 4 subgroups: Common Settings, Dial-Out Settings,
Dial-In Settings, and TCP/IP Network Settings. The following will explain every subgroup
in detail.
Common Settings
♦
Profile Name – Specify a name for the remote network.
♦
Enable this profile – Check here to activate this profile.
♦
Call Direction – Specify the allowed call direction for this profile.
Both - allow access of both outgoing and incoming calls.
Dial-Out - allow access of outgoing calls only.
Dial-In - allow access of incoming calls only.
♦
Idle Timeout – Default setting is 300 seconds. When a connection of a profile
has been idled longer than the time limit, the router will drop the connection.
Dial-Out Settings
♦
Username – Specify a username for authentication by the remote router.