Technicolor - Thomson 210i - Manual (Page 36)

SpeedTouch 210i
32
♦
Dial-In Service – Enable
♦
Start IP Address – 192.168.2.200
Creating a LAN-to-LAN Dialer Profile
After enabling the Dial-in service, you must create a LAN-to-LAN profile
for each network. From the Advance Setup menu, click LAN-to-LAN
Dialer Profile to enter the setup page displayed below.
The router provides 16 LAN-to-LAN profiles for connecting to up to
16 different remote networks.
♦
Set to Factory Default – Clicking here will clear all the LAN-to-LAN
profiles.
♦
Index – Click a number in the Index to open a detailed settings page for each
profile.
♦
Name – Indicate the name of the LAN-to-LAN profile. The symbol "???"
means the profile is available.
♦
Status – Indicate the status of the individual profiles. The symbol "v" means the
profile is active and "x" means it is inactive.
Click an index number to open an individual LAN-to-LAN profile settings page.