Speedtouch 210i – Technicolor - Thomson 210i User Manual

Page 34

SpeedTouch 210i

LAN-to-LAN Access

The following sections are based on the network layout above to describe how to set up a
LAN-to-LAN profile to connect two private networks. In the above network layout, the
private network of the head office is 192.168.1.0/24 and the off-site branch office
network is 192.168.2.0/24.

Before you begin to setup a LAN-to-LAN profile for each network, you should gather the
information shown in the following table.

Head Office

Branch Office

Network ID

192.168.1.0/24

192.168.2.0/24

Router IP address/netmask

192.168.1/24

192.168.2.1/24

Assigned IP for dial-in

connection

192.168.1.200

192.168.2.200

Access Account

UN: head; PW: head

UN: branch; PW: branch

ISDN line number

1000

2000

Callback function

Disable

Activating the Remote Dial-In Capability

In the Quick Setup group of the Setup Main Menu, click Remote Dial-In
Access Setup to enter the setup page. See the Remote Dial-In Access section earlier in
this chapter for a full explanation of the fields on this page.

Head Office:

SpeedTouch 210i