Roubleshooting – Technicolor - Thomson DTH 6000 User Manual

Page 32

Use

roubleshooting

The appliance does not switch on.

Remote control

The remote control does not work or
works only intermittently.

Picture

There is no picture.

The picture is of poor quality (with
snow or lines).

Sound

There is no sound or the sound is of
poor quality.
Stereo sound is not reproduced.

Recording

The

symbol flashes on the display

and/or the DVD/VCR ejects the cassette
when I want to record.

The DVD/VCR does not accept the
PlusCode number I enter.

The DVD/VCR displays the

TIMER

menu when I try to enter a PlusCode
number.

The DVD/VCR asks me to enter the
number of the channel
corresponding to a PlusCode number.

Subtitles

The subtitles do not appear.

Disc menu language

The disc menu language is not the
correct one.

Lock

You have forgotten your password.

1. Make sure it is plugged into a mains socket.
2. Press the B key on the front of the appliance.

1. Aim the remote control at the appliance. The infrared

beam must not be blocked or interrupted.

2. Check that batteries are fitted, or change them.

1. Check you have switched on the TV set.
2. Check the connections.
3. Select the AV input or the channel assigned to the video

recorder on the TV.

1. Check the connections.
2. Adjust the tracking in playback or stability in pause.

Check the connections.

1. The sound from TV channels or a tape transmitted by

coaxial cable is monophonic. To reproduce stereo sound
on the TV, connect it to the appliance using a SCART
cable.

2. Adjust the sound type.

1. Make sure you have inserted a cassette correctly in the slot.
2. Check that the cassette’s protective tab is not broken. If

it is, cover the hole with adhesive tape.

The number must be incorrect. Check you did not make an
error when entering the number. If the number still does not
work, programme your recording manually using the

TIMER

menu.

You have already programmed eight recordings. Delete a
programme before trying to create another.

This is a normal procedure when programming the first
VIDEO Plus+ recording on a channel.

1. Check that the DVD disc provides subtitles.
2. Look up how to display subtitles.

1. The disc menu language has not been set up.
2. The language of your choice is not available on the disc.

Open the player’s disc tray, and then press the

STOP

key on

the remote control and the

STOP

key on the front panel

simultaneously for three seconds.

4 & 5

14
33

PROBLEM

SOLUTION

SEE

PAGE …

DTH6_UK 10/07/02 16:00 Page 32