beautypg.com

Ther functions, Index search, Menu – Technicolor - Thomson DTH 6000 User Manual

Page 21: Tracking and stability in play mode, Playing ntsc tapes

background image

EN

EN

21

Use

O

ther functions

Index search

Indices allow you to mark particular tape sections (beginning of films, sequences, etc.)
to retrieve them quickly. At the beginning of every recording, the video recorder
automatically marks an index on the tape.

To retrieve the previous or next index mark, press C or B; this function requires
the tape to be on STOP.

STATUS

menu

Using the

INFO

key, you can display the information

concerning video recorder operation (tape type, time
remaining before end of tape, type of sound, image
format, tape speed, channel, time...).

By default, the cassette type shown on the
information screen is E180. Since the remaining time
is deduced from the duration of the cassette, you
must enter the cassette type for E240 and E300
cassettes. Press again the

INFO

key; the cassette type is highlighted. Use the ▼

and ▲ keys to display the appropriate cassette type, and finally press

OK

to

confirm. If you insert a cassette with a duration shorter than 180 minutes, you
need not enter the cassette type; the VCR will calculate automatically the duration
of the cassette.
To reset the counter, call up the

STATUS

menu with the

INFO

key and press the

0000

key (re-setting the counter requires a tape to be loaded).

Tracking and stability in play mode

The pictures of some tapes (hired or other) may flicker, show interference lines on the
bottom of the screen or be altered by other undesirable effects. With the Tracking or
Stability adjustments, you can eliminate or reduce these image faults.

1

Load a tape.

2

Either start playing using the

PLAY

key or switch into slow motion using

PAUSE

and

FWD.

or into pause using

PAUSE

.

3

Press ▼: a menu comes up.

In the play or slow motion mode, you may adjust tracking.
In pause mode, you may adjust stability.

4

Adjust using the ▼ or ▲ key.

5

Restore the standard setting with the

0000

key.

Playing NTSC tapes

NTSC is the colour television standard used in the United States, in Japan and other
countries. Your video recorder can play VHS-NTSC tapes, but you must have a television
set compliant with the PAL standard. Most of the PAL television sets provide proper
reproduction of the pictures from NTSC tapes.

VCR

0h0

0h0

1m15s

1m15s

00h2

00h2

1m

1m

E180

E180

B

B

SP

SP

17:2

17:2

1

1

VCR

DTH6_UK 10/07/02 16:00 Page 21