Technicolor - Thomson DTH 6000 - Manual (Page 18)

18
Use
TIMER OVERLAP
If you programme two or more recordings with overlapping time periods, the TIMER
REVIEW menu comes up along with an error message and the overlapping programmed
recordings are flashing.
Delete the programmed recordings using the 0000 key.
INCOMPLETE TIMER
Check that you have completed all the requirements for the recording (start and
end times, etc.).
Deleting a programmed recording
1 Display the OVERVIEW menu using the MENU key, select the Record timer line with
the ▼ key and confirm with OK .
2 Select the Timer review line and press OK .
3 Select the programming you wish to delete using the ▼ and ▲ keys. Press the
0000 key.
The programming is now deleted.
4 Leave the menu using the EXIT key.
Recording programmed on a connected set
The recording of a programme can be triggered by a satellite receiver or another device
designed for this purpose connected to socket AV1 or AV2 with a SCART cable. This
avoids having to programme both units.
Programme the connected device and select AV1 or AV2 as appropriate in the
video recorder's
TIMER menu.
DTH6_UK 10/07/02 16:00 Page 18