Tunturi Competence T10 User Manual

Page 4

•

POWER CORD AND GROUNDING
INSTRUCTIONS

Plug the socket end of the power cord into the

treadmill at the left front corner. Before connecting

the device to a power source, make sure that local

voltage matches that indicated on the type plate. The

treadmill operates at 110 V or 230 V.

This treadmill must be grounded. If it should

malfunction or breakdown, grounding provides a

path of least resistance for electrical current to reduce

the risk of electrical shock. This product is equipped

with a cord having an equipment-grounded conductor

and a grounding plug. The plug must be plugged

into an appropriate outlet that is properly installed

and grounded in accordance with all local codes

and ordinances. Do not use extension cables when

connecting the equipment to the power source.

DANGER!

Improper connection of the equipment-

grounding conductor can result in a risk of electric

shock. Check with a qualified electrician or

serviceman, if you are in doubt as to whether the

product is properly grounded. Do not modify the

plug provided with the product - if it will not fit the

outlet, have a proper outlet installed by a qualified

electrician.

SAFETY TETHER KEY

The treadmill cannot be used if the tether key

is not properly installed on the console; if the

key is removed from its place, the treadmill will

immediately stop. Place the safety tether key in its

place on the console. Ensure that the clip of the safety

tether key is properly attached to your clothing; as

the cord tightens, make sure the clip does not detach

itself from your clothing before the safety tether key

disconnects from the console.

CONSOLE

KEY FUNCTIONS

A. SAFETY KEY:

The monitor and the treadmill can be operated only

with the key attached on the SAFETY KEY ON

button and both of the monitor and the treadmill stop

as soon as the key is removed. Do not exercise, please

attach the Safety Key on the OFF position.

B. MAJOR FUNCTION KEYS:

1. ELEVATION +:

Press this button to choose the program form

P1, P2, P3, P4, P5, P6,P7, U1 andU2.

During the setting mode, press this button to

increase the setting value.

During the exercise mode, increases the

elevation level in the range from 0% to 12%.

Pressing once increases 1 % and to speed up

the decrement by pressing and holding it for

2 seconds.

2. ELEVATION –:

Press this button to choose the program form

P1, U2, U1, P6, P5, P4, P3, and P2.

During the setting mode, press this button to

decrease the setting value.

During the exercise mode, decreases the

elevation level in the range from 0%-12%

–11% to 0% . Pressing once decreases 1%

and to speed up the decrement by pressing

and holding it for 2 seconds.

3. POWER:

Press this button to turn on or turn off

the power.

4. START/STOP:

Starts or stops the program.

5. SCAN/SELECT:

Select: During the exercise stage, press this

button to scan the function of Distance,

calories, heart rate and elevation. (LED light

will not glitter)

b. SCAN:

During the exercise stage, press this

button for 5 seconds to scan the function of

the Distance or kcal or heart rate or elevation

function automatically (LED light will

glitter.)

6. ENTER/RESET:

Press this button to conﬁrm your desired

program or setting value.

Hold two seconds to reset all of the value to

initial mode.

7. SPEED +:

Press this button to choose the program form

P1, P2, P3, P4, P5, P6, P7, U1 andU2.

During the setting mode, press this button to

increase the setting value.

During the exercise mode, increases the

speed level in the range from 0.8to 16.0 KPH

or 0.5 MPH to 10 MPH shown in the SPEED

Display. Pressing once increases 0.1 KPH

or 0.1 MPH. To speed up the increment, hold

this button more than 2 seconds.

8. SPEED –:

Press this button to choose the program from

P1, U2, U1,P7, P6, P5, P4, P3, and P2.

During the setting mode, press this button to

decrease the setting value.

During the exercise mode, decreases the

speed level in the range from 0.8 to 16.0

KPH or 0.5MPH to 10MPH shown in the

SPEED Display. Pressing once decreases

0.1 KPH or 0.1 MPH. To speed up the