TP-Link TL-WR740N User Manual
Page 50

TL-WR740N
Wireless Lite N Router
- 43 -
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3. Select
Enabled or Disabled for this entry on the Status pull-down list.
4. Click
the
Save button to save this entry.
To modify or delete an existing entry:
1. Click
the
Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click
the
Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page.
Click the Previous button to return to the previous page.
For example: If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B and
the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the Router, but all
the other wireless stations cannot access the Router, you can configure the Wireless MAC
Address Filtering list by following these steps:
1. Click
the
Enable button to enable this function.
2. Select the radio button “Deny the stations not specified by any enabled entries in the list to
access” for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click
the Add New... button.
1) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.
2) Enter wireless station A/B in the Description field.
3) Select
Enabled in the Status pull-down list.
4) Click
the
Save button.
5) Click
the
Back button.
The filtering rules that configured should be similar to the following list: