Repeat – TOYOTA EPS9000 User Manual
Page 81
OPERAT
ION
PROCED
URE
81
REPEAT
This function repeatedly embroiders the design data which is set as the
embroidery data.
The function allows the setting of direction of repeat, the number of repetition
times and the spacing between designs.
The design arranged using the repeat function may be rotated and
reversed.
Priority: Repeat
Rotation
Mirror
Horizontal, Times: 3, Space: 55 mm> You can check the entire embroidery range by executing trace after setting Horizontal, Times: 3, Space: 60 mm, Rotation: 90 , Mirror: X> FD07 55 mm Direction: : Design Horizontal start point 60 mm Direction: Horizontal (Although "HORIZONTAL" is set for DIR, Rotation M irror Design start
the repeat data. Adjust the start point, number of repetition times and
spacing so that the embroidery range will not exceed beyond the hoop.
design is arranged vertically
since 90 rotation is set.)
position