Toshiba TEC FS-3700 R4 Series - Manual (Page 73)

Chapter 3 - Guest Check Functions Check Adjustments
FS-3700 R4 Owner’s Manual 3-33
 Automatic Discount
 A discount can also be linked to a Media type so it is automatically entered
on a check when the check is tendered. This is set using Media
Setup\Main, Discount Link.
 Enter a Discount
 A discount can be entered on a check using a preset
[DISCOUNT] key.
 A discount can also be entered by indexing the Discount I.D. number then
pressing the [DISCOUNT NLU] key.
Item Discount
An item discount is one programmed to one item or one Department. It is entered on
a check immediately following the item.
1. Touch the item on the check.
2. Press the [DISCOUNT] key wanted or press [DISCOUNT NLU] then touch the
discount wanted.
3. If prompted, index a manager I.D. and press ENTER.
4. If prompted, index the amount for the discount and press ENTER.
5. Continue entering items to the check.
Subtotal Discount
A subtotal discount is one programmed to adjust all discountable items on the check.
1. Enter item(s) to the check.
2. Press the [DISCOUNT] key wanted or press [DISCOUNT NLU] then touch the
discount wanted.
3. If prompted, index a manager I.D. and press ENTER.
4. If prompted, index the amount for the discount and press ENTER.
5. End the service round by pressing [TOTAL] , [MEDIA] or [PRINT CHECK] .