Toshiba W-717 - Manual (Page 19)

19
PLA
YBACK
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of
CH/TRK to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.
Basic Playback
1
Load a recorded cassette.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
2 Press PLAY/x2 to start playback.
3 To stop playback, press STOP.
To resume normal playback Press PLAY/x2.
Rewinding / Fast-forwarding
Press REW or FF on the Remote control, turn REV or FWD on
the VCR in the stop mode.
S S L P
VCR REC L
TIMER
S
VCR REC L
TIMER
PLAYBACK
Playback
This section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
VCR REC L
TIMER
3 2,
FF
CH/TRK
REW
PROG. ENTER
SLOW PLAY/x2 PAUSE/STILL
REW F F
CURSOR
STOP
1 2 3
4 5 6
7 8 9
CANCEL
A.SELECT
EJECT
VC-717
0 100
CURSOR
STOP
VCR Plus+ CH
CABLE BOX
1
Press PLAY/x2 during playback.
A tape runs at double speed
playback.
Double Speed Playback
S-VHS Quasi Playback (SQPB)
• This VCR can also play back at tape which is recorded in S-VHS format.
But the playback pictures does not have the same quality and
resolution as the original S-VHS playback picture.
• This VCR cannot record in S-VHS format.
• SQPB is an abbreviation for S-VHS Quasi Playback.
W-717/Eng(19-23) 9/1/01, 10:40 AM 19