Toshiba TheaterView 43H71 - Manual (Page 19)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V
’s
F
eatur
es
Appendix
Index
19
Adding channels to the TV’s memory
When you press Channel yz, the TV will select only the channels
stored in the TV’s channel memory.
Follow the steps below and on the next page to program all active
channels into the TV’s memory.
Programming channels automatically
The TV can automatically detect all active channels in your area and
store them in its memory. After the channels are stored automatically,
you can manually add or erase individual channels (see page 20).
To program channels automatically:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z until TV/CABLE is highlighted.
3. Press x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV; if you use
cable, highlight CABLE.
SET UP
LANGUAGE
CLOCK
ANT
ADD ADD ERASE /
TV
CH PROGRAM TV / CABLE / CABLE
1 ANT 1 / 2
SET
ENGL SH I
0 0 : 0 0
4. Press z to select CH PROGRAM.
SET UP
LANGUAGE
CLOCK
ANT
ADD ADD ERASE /
TV
CH PROGRAM CABLE / CABLE
1 ANT 1 / 2
SET
ENGL SH I
0 0 : 0 0
5. Press x or • to start automatic channel programming. The TV
will automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
“Programming Now—Please Wait” appears.
6. When channel programming is complete, the message
“Completed” appears.
7. Press Channel yz to view the programmed channels.
Note:
To tune the TV to a channel not programmed
in the channel memory, use the Channel
Number buttons on the remote control.
1 2 3
4 5 6
7 8 9
ENT 100 0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO MUTE
TV
CABLE
VCR
CH RTN
PIC
S
IZ E
E X IT
LIGHT
ADV/
PIP CH
ADV/
PIP CH
FAV FAV
FAVORITE
MENU/
STROBE
ENTER
MENU
yzx •
Channel yz
Channel
Number