TurboChef Technologies Rapid Cook Oven Tornado - Manual (Page 26)

wArning: inside of oven is hoT! insert
food with caution.
c. Close the oven door and press the bottom-left
soft key to test the new settings.
d. Follow steps 5-8 in the section titled cooking
instructions, pages 15-16.
9. Press the bottom-right soft key to save the new
settings.
Doing so will permanently replace old
item settings.
10. when done editing recipes, press the back key
until returned to the cooling down or oven
off screen.
CHANGING THe Idle IR seT TeMPeRATuRe
wArning: The idle ir set temperature is
pre-determined by the menu developer.
Changing this setting is not recommended,
unless performed by the menu developer or
TurboChef Culinary or engineering staff.
valid idle ir settings range between 500-1150ºF
(260-620ºC). The temperature will be rounded to
the nearest 50ºF (20ºC) increment.
To change the idle ir set temperature:
1. From the cooling down or off mode, simulta-
neously press the back and enter keys.
2. enter the code 9-4-2-8 (w-h-A-T) and press
enter.
3. Press the down key to scroll to screen 2 of the
test mode.
4. Press the soft key adjacent to “ir Si” (bottom-
right soft key) and press enter.
5. Using the numeric Keypad, enter a new idle ir
set temperature.
6. Press enter to confirm the change.
7. Continually press the back key to return to the
cooling down/off mode.
As a general rule, the idle ir set temperature
should be the average of all food item ir set
temperatures (typically 1000ºF). This prevents the
ir element from having to drastically warm up or
cool down between cook cycles.
eNABlING/dIsABlING THe edIT MOde
The edit mode can be disabled to prevent
unauthorized editing of food items/cook cavity set
temperature.
To enable/disable the edit mode:
1. From the cooling down or off mode,
simultaneously press the up and down keys.
2. enter the code 8-4-3-3 (T-i-D-e) and press
enter.
3. when prompted, pressing “9” will enable edit
mode. Pressing any other numeric key will
disable edit mode.
COOKING OPTIONs - TIMe, dONe, ANd
sNOOze
The “enter Cook Time” screen
enable the enter cook time screen to provide the
option to change the cook time of a recipe before a
cook cycle initiates (see page 15).
To enable/disable the enter cook time screen:
1. From the cooling down or off mode, simulta-
neously press the back and enter keys.
2. enter the code 8-4-6-3 (T-i-M-e) and press
enter.
3. when prompted, pressing “9” will enable the
enter cook time screen. Pressing any other
numeric key will disable the enter cook time
screen.
18 OPeRATING THe TORNAdO OveN