TurboChef Technologies Rapid Cook Oven Tornado - Manual (Page 15)

OveN AsseMBly
Oven Assembly
1. Carefully remove packing materials from the
wire rack.
2. open the cook cavity door.
3. remove packing materials from inside the oven.
4. Place wire rack in oven.
OPTIONAl INsTAllATION ITeMs
Oven Restraint Kit (P/N TC3-0242)
The oven restraint Kit is an optional system
intended to hinder the oven from moving forward
during use and/or cleaning. it will not prevent the
oven from falling off a countertop if the legs are
allowed to slide off the edge or if the oven is inten-
tionally or forcefully pulled off.
Proper installation instructions are included with
the oven restraint Kit. if additional help is needed,
call Customer Service at
800.90TUrBo (+1 214-
379-6000) or your Authorized Distributor.
Fan
300 CFM (8.5 CMM)
Unobstructed
Airflow
Discharge
to Ambient
1: Must be included by contractor
Notes:
Unobstructed
Airflow
2.0" (51mm)
2.0" (51mm) 2.0" (51mm)
2.0" (51mm)
4.0"
(102mm)
figure 6: installation near open heat Source
figure 5: Built-in installation
7 AsseMBly ANd INsTAllATION