Tyco InfoProx Lite IPL200 - Manual (Page 2)

Physical
Size 86 x 86 x 22mm (3.4” x 3.4” x 0.87”)
Weight 222.7g (7.9oz) with connectors
Housing Flame retardant polycarbonate containing
fully encapsulated electronics.
Colour Dark Grey
Power
- Voltage
9 – 15Vdc
- Current
Consumption
140mA (passive), 250mA (peak)
Backup Battery Rechargable Lithium battery giving
database backup for over 3 months.
Environmental
- Temperature
-10º to 50ºC (14º to 122ºF)
- Humidity 95% non condensing
LED Indicators Three high intensity LED indicators red,
amber and green
LCD Indicators Two line by 16 character supertwist LCD
with backlight
Keypad 12 character, standard layout, tactile
response keypad.
Functionality
Inputs Four analog inputs (Transguard protected)
(Door Position, Lock Position, REX Button,
Spare)
Outputs Two current limited open collector outputs
(Door Lock, Unused – for future use)
Configuration
Operational parameters are downloaded
from host computer. Some configuration
setting can also be set using the keypad.
communication interFace
To Exit Reader RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
- Connection 2 part screw terminals
To System Host RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
- Connection 2 part screw terminals
Product codes
InfoProx Lite IPL200 (125 kHz Proximity)
SPASS-IPL-200-B
InfoProx Lite
SPASS-IPL-200-A InfoProx Lite (US Backplate)
InfoProx Lite IPL210 (MiFare CSN)
SPASS-IPL-210-B
InfoProx Lite
SPASS-IPL-210-A InfoProx Lite (US Backplate)
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: [email protected]
www.cemsys.com
door control unit installation
The enclosure is designed to mount directly onto a standard
UK or European (French) electrical containment box (American
versions are provided with a compact adapter plate), meaning
that standard conduit and fittings may be used.
remote Programming
Operational parameters, e.g. door open time, are downloaded
to the reader from the host computer. Additionally some
parameters can also be configured via the keypad. InfoProx
readers can even be remotely upgraded, eliminating the need to
physically replace firmware, giving increased system flexibility
and efficiency.
card technology
The InfoProx (IPL200) reader uses 125 kHz proximity
technology under license from HID Corporation.
A 13.5 MHz technology (IPL210) option of the reader is
available enabling the InfoProx to read the unique ID of MiFare
smart cards (ISO14443A). The following cards are supported:
Type of Card Read Range (IPL200)
ISOProx® II Card
76mm (3.0in)
ProxCard™ Plus Card 38mm (1.5in)
ProxCard® II Card 76mm (3.0in)
ProxKey™ II Fob
25mm (1.0in)
Kantech 31bit Card 38mm (1.5in)
Type of Card Read Range (IPL210)
MiFare Card
30mm (1.18in)
Built-in diagnostics
Allows testing of LED indicators, LCD display, read head, inputs,
relay, network communications and keypad.
system compatibility
The reader can be used with AC2000 or webEntry access control
systems.
PRODUCT HIGHLIGHTS
CEM/B/138
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.
technical sPeciFications