Edit contact, 2 edit contact – TANDBERG Utility User Manual
Page 42
TANDBERG COMPASS MXP / UTILITY MXP
34
3.12.2 Edit Contact
The Edit Contact function is available from
It is recommended to add new contacts remotely using the IP address and the web-interface or
telnet.
To perform the following using the remote control the Kiosk Mode must first be deactivated. This
is done via the telnet or web-interface, or by pressing 5 times on the Phone Book symbol then
once on the number 3 on the remote control. The remote control can be directed to the inside
lower edge of the Compass MXP cabinet (i.e. the unit must be temporarily removed from the
wallplate). On the Utility MXP the remote control can be held directly in front of the small hole just
under the speaker grill.
How to edit a contact in the Local Phone Book:
1. Select the contact that is to be edited.
2. Press the left arrow on the remote control, followed by the down arrow until the Edit
Contact icon is selected.
3. The current settings for this contact are displayed in a dialogue box. Alter the wanted
settings.
4. Press OK to save.
Figure 3-12. Edit Contact.