Tripp Lite SUPT60K - Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: SUPT60K
3-Breaker Parallel Tie Cabinet (for SU60K 3-Phase UPS)
Highlights
3 breaker parallel tie cabinet accessory for two Tripp Lite 3 phase UPS
systems
Enables dual-UPS redundancy or links the output of two UPS systems
for double-capacity
3 built-in circuit breakers, heavy duty copper buswork
Compatible Tripp Lite SU60K 3 phase UPS systems
Description
Tripp Lite's parallel tie cabinet provides a means for safely paralleling two UPS systems for either redundancy or additional capacity. Redundant
configuration provides fault-tolerance to maintain network operations during failure of one UPS. Non-redundant configuration combines the output of
two UPS systems to support twice the output current. Two input breakers receive incoming pwoer from the UPS and are connected to heavy duty
copper buswork and an output breaker rated for the total UPS capacity of the two UPS systems combined. See downloads section for Tripp Lite
3-Breaker Parallel Tie Cabinet detailed specifications, dimensional drawings, operational flow charts and technical description of each included
component.
Compatible with two Tripp Lite SU60K UPS systems.
Specifications
OVERVIEW
Model Type Tie Cabinets
INPUT
Nominal Input Voltage(s)
Supported 208V AC
Voltage compatibility (VAC) 208
PHYSICAL
Shipping Dimensions
(HWD/in) 45.55 x 38.85 x 12.55
Shipping Dimensions
(HWD/cm) 115.7 x 98.7 x 31.9
Shipping weight (lbs) 305
Shipping weight (kg) 138.5