Toshiba E-STUDIO 165 EN - Manual (Page 91)

Managing Address Book 91
4
In the Sending Options tab, enter items as described below as
required.
Use Sub Address and sender information — Check this to enable subaddress
transmission for this contact. When this is checked, documents will be always sent using
the specified sub address and
SID. Also you can use this contact to perform polling transmission from the mailbox in the
remote facsimile using the specified sub address and password.
Sub Address — Enter the sub address or mailbox number of remote facsimile where a
document will be sent. This can be entered only when “Use Sub Address and sender
information” is enabled.
Sender Identification — Enter the security password for the sub address if required.
This can be entered only when “Use Sub Address and sender information” is enabled.
Other items in this tab cannot be modified.
5
Click [OK].
The contact is added to the list in the selected folder.