Tascam CC-222MKII - Manual (Page 38)

7 – Reference and specifications—Specifications
38
TASCAM CC-222MKII Owner’s Manual
Cassette recorder section
Phono input and headphones
Digital inputs
Sampling rates 32 kHz, 44.1 kHz, 48 kHz
COAXIAL RCA pin, IEC60958 TYPE II
OPTICAL TOSLINK, IEC60958 TYPE II
Digital outputs
COAXIAL RCA pin, IEC60958 TYPE II
OPTICAL TOSLINK, IEC60958 TYPE II
LINE INPUTS 1 Unbalanced RCA
Nominal input level –10 dBV (6 dBV –16 dB)
Maximum input level + 6dBV
Input impedance 50 k
Ω
LINE OUTPUTS 1 Unbalanced RCA
Nominal output level –10 dBV (FS –16 dB)
Maximum output level +6 dBV
Output impedance 1 k
Ω
(unbalanced)
Number of channels 4-track, 2-channel stereo
Heads Record/playback x 1 (rotary reverse), erase x 1
Type of tape Compact Cassette C-60, C-90 (Type I (normal), Type II (high-position/chrome)
–recording and playback; Type IV (metal)–playback only)
Tape speed 4.76 cm/s (1 7/8 ips)
Motor DC servo motor (x 1)
Wow and flutter 0.19% (W. RMS)
Frequency response (overall) 50 Hz — 12.5 kHz ±3 dB (high position)
50 Hz — 10 kHz ±3 dB (normal)
Signal-to-noise ratio (overall) 46 dB (Dolby NR off)
52 dB (Dolby NR on)
Fast winding time About 120 seconds (C-60)
LINE INPUTS 2 Unbalanced RCA
Nominal input level Nominal input level 0.28V (–11 dBV)
Input impedance 50 k
Ω
LINE OUTPUTS 2 Unbalanced RCA
Nominal output level 0.46V (–6.7 dBV)
Output impedance 50 k
Ω
RIAA PHONO INPUT Unbalanced RCA (with ground)
Cartridge type MM (moving magnet)
Input signal level 5.6 mV
Input impedance 47 k
Ω
Signal-to-noise ratio 60 dB
PHONES (headphone output) 6 mm (1/4”) stereo
Output level 10 mW + 10 mW (into 32
Ω
)