Tascam CC-222MKII - Manual (Page 21)

TASCAM CC-222MKII Owner’s Manual
21
4 – CD player
The CC-222MKII can be used to play back CDs
(including CD-R and CD-RW discs that have been
recorded and finalized on other types of recorder), as well as CD-R discs and CD-RW discs that have been
recorded on the unit.
Simple playback operations
1 Press the OPEN/CLOSE key to open the disc
tray.
2 Discs should be inserted in the tray with the
label uppermost.
3 Press the OPEN/CLOSE key to close the tray
again.
When a disc is loaded into the unit, the display
briefly shows
TOC Reading. , with a flashing
period following the word “Reading” as the unit
determines the contents of the disc. When the TOC
has been read, the display shows (at the left of the
display) one of the following:
1 Press the PLAY key to start playback.
2 Press the STOP key to stop playback (note that
no digital signal is output when playback is
stopped).
3 Press the PAUSE key to pause playback
temporarily.
The track number indicators at the bottom of the dis-
play light, to show the available unplayed tracks. If
there are thirteen tracks on the disc, for example,
indicators
1 through 13 will light. If there are more
than 20 tracks on a disc, the track number OVER indi-
cator (at the bottom of the display) will light.
Time display modes
When playing back a CD (or when in pause mode),
there are four different time display modes.
In each mode, the current track number is given, fol-
lowed by the time, as given below, e.g.
10 Tr 0:48
Press the DISPLAY key to cycle through these time
display modes, as described here:
NOTE
If programmed playback has been selected (“Pro-
grammed order playback” on page 22), the elapsed
time and total remaining time refer to the programmed
material, not the whole disc.
Track search
Use the MULTI DIAL (or the SKIP keys on the
remote control unit) to jump forward or backward by
one track at a time, as shown on the display.
Note that going forward from the last track of the
disc will “wrap round” to track 1, and going back-
ward from the first track of the disc will “wrap
round” to the last track of the disc.
The track number indicators at the bottom of the dis-
play shows the selected track (the lit indicator at the
left of the row of indicators).
It is also possible to use the number keys on the
remote control unit to jump directly to a particular
track:
1 To play tracks 1 through 9, simply press the
appropriate key (
1 through 9 ).
CD A commercial pre-recorded CD or a
finalized CD-R
CD-R, NO TOC A CD-R which has yet to be finalized
CD-RW, NO TOC A CD-RW which has yet to be finalized
CD-RW A finalized CD-RW (this differs from a CD,
as it may be unfinalized and erased)
[blank] Unusable or unreadable disc or no disc
Display shows Meaning
TOTAL Total elapsed time of the disc
[blank] Elapsed time of the current track
TOTAL REMAIN Time remaining of the current disc
REMAIN Time remaining of the current track