Toshiba W-727 - Manual (Page 27)

27
RECORDING
If a power failure occurs during the
timer program recording (including
VCR Plus+ C system recording
(page 30)
• When a power failure has occurred, the
programmed contents are not effected, reset
the clock
Overlaps of the programs
If two timer programs overlap, the recording start
time of program 1 has priority over the recording
off time of program 2.
Confirming the timer programs
Press PROG. during timer recording mode.
The screen for confirming will appear.
Press PROG. again to exit from confirmation
page.
Changing/cancelling the timer
programs.
1) If the TIMER indicator is lit, press both TIMER
to turn it off, and then turn the VCR on by
pressing VCR
POWER.
2) With steps 2 to 9 , change the items.
To cancel a program, select the program you
want to cancel in step
4 , and press CANCEL.
The line is then cleared.
3) Press both TIMER to return to the timer
standby mode.
Error indication
The “--E--” ( Error ) indicator appears in the VCR
display if you press both
TIMER when:
–– a cassette is not loaded.
–– the loaded cassette has no safety tab.
–– timer recording is in progress.
In these cases, a recording can not be made.
To Cancel the Timer Recording
By pressing the POWER button on the front
panel of the VCR , it will cancel the timer
recording and go to standby.
P
M
P
M
Program 1
(Start time)
Program 2
(Start time)
Overlapped portion
(not recorded)
3 ®
W-727/Eng (24-39) 2/28/02, 3:59 PM 27