Transcend Information StoreJetTM OTG - Manual (Page 10)

Performing a Reset
If the StoreJet ™ OTG stops responding, or the display freezes you can perform a reset by pressing the
reset button with the head of a pen or pencil. Files that are in the process of being transferred may be
lost during the reset, but the StoreJet
™
OTG’s other data is normally retained. After the reset, the
StoreJet
™
OTG will automatically turn off and need to be restarted by pressing the Power Button.
Standalone Operation
Use as a Standalone Device
Before using the StoreJet
™
OTG as a Standalone device you must disconnect
it from your computer.
Do NOT connect the StoreJet
™
OTG to your computer when it is copying data
as a Standalone device. This may cause unexpected results and possible
data loss.
Power ON
Press and Hold the Power Button for more than 1 second to turn on the StoreJet
™
OTG. The
Transcend logo will appear on the OLED display.
Power OFF
Press and hold the Power Button for about 2 seconds and the Power Off Status Bar will appear on the
8