Texas Instruments CC2533 User Manual
Page 12
swru266
12/25
Figure 6: The driver installation is completed (Windows XP)
Select the following directory
\Tools\Driver for the needed *.inf and *.sys
driver files.
The driver is now installed and the PC is can communicate with target module using a virtual
COM port. Unfortunately Windows does not confirm what COM port the device is assigned to.
To see the COM port number, open the Windows Control panel – System – Hardware –
Device Manager and check the COM port number under Ports (COM and LPT).
The driver is properly installed if the target module is listed under the “Ports(COM & LPT)”
contains “TUSB3410 Device(COM xx)” and that it is not labelled with an exclamation mark. If
there is an exclamation mark, right click with the mouse on the line and choose “update
driver” and follow the instructions above.
Figure 7: Correct target module setup (Windows XP)