Toshiba STRATA DP5000 - Manual (Page 120)

Administrator Programming
DKT2000 Mode On/Off
104
Strata CIX DP5000-series Telephone UG 05/09
DKT2000 Mode On/Off
Before a cordless telephone (DKT2204-CT or DKT2304-CT) can share a digital
station port with a DP5000-series telephone set, the port must be programmed into
2000 mode. If the mode is not changed to 2000-mode, the DP5000 phone will not
work and the display will be blank. Also see CIX Installation and Maintenance
Manual for additional information.
In 2000-mode:
• Only 16 characters by two lines display on the LCD.
• LCD Programmable Feature Button does not work
• Spdial button does not work
Step 1: Turn DKT2000 Mode On/Off
Important! Change the mode on DP5000-series telephone before connecting a
DKT2204-CT or DKT2304-CT.
1. On the DKT3x00 telephone, press
3
+
6
+
9
+
Hold
(simultaneously).
2. Press
#
.
3. Press
FB7
. LED On = 2000 telephone. LED Off = 5000-series telephone.
4. Press
Hold
.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone
to reset itself.
Step 2: Connect Cordless Telephone to DP5000-series
Telephone
The cordless telephone (base station) will connect to the digital station port and then
in turn the DP5000 phone will connect to the cordless base station.