Toshiba e-STUDIO166 - Manual (Page 28)

1 PREPARATION
26 Description of Each Component
Control panel
1. [SORT] button/lamp
Use this to use the sorting function.
P.69 “Copying in Same Page Order as Originals - Sort Copying -”
The sorting functions are available only when originals are placed on the Automatic Docu-
ment Feeder (optional, MR-2017). These functions also require the Expansion Memory
(optional, GC-1240).
2. Media type setting button/lamps
Use this button to switch the media type of paper placed on the bypass tray.
P.50 “Using Bypass Tray”
3. [DATA] lamp
The lamp blinks when print data are being received from a PC connected to the equipment.
4. Message lamps
Each of five lamps shows you the current status of the equipment.
For the meaning of each lamp and countermeasure of each status, see the following page:
P.78 “When Message Lamp is Lit/Blinking”
5. Zoom buttons/lamp
Use them to set reproduction ratio. The lamp above the button is lit when the repro-
duction ratio is 100%.
For how to zoom in or out copy image, see the following page:
P.64 “Zooming In/Out Copy Image”
1 2 3 4 8 9 10
12 13 15 14 17 18 19 20 21
11 6 5 7
16