Toshiba e-STUDIO166 - Manual (Page 15)

Features of e-STUDIO166/206 13
Features of e-STUDIO166/206
The e-STUDIO166/206 is a space-saving, black-and-white copier. The copying speed of the
e-STUDIO166 is 16 copies per minute
*1 and that of the e-STUDIO206 is 20 copies per minute *1 .
Both of them can be a printer when they are connected to your PC with a USB cable. *2
Lightweight and space-saving equipment with more emphasis on basic functions
y The receiving tray is relocated to the equipment’s inner side, occupying as little space as
possible.
y Its weight has been trimmed to approx. 33.7 kg. *3
y Operability of the control panel has been upgraded with larger buttons.
y A wide range of paper sizes from A3 to A5-R are acceptable.
y Copy images can be zoomed out or in between 25% and 200%.
y The automatic copy density mode is adopted to detect the density of the original and auto-
matically adjust it to the most suitable one for the copy image.
y The bypass tray equipped as a standard unit makes copying on various media types such as
overhead transparencies possible.
y Scanning data with a TWAIN driver is enabled as a standard function.
Functions extended by various options
y The Automatic Document Feeder (ADF) dramatically saves time when you need to copy
massive amounts of originals.
y The Paper Feed Unit (PFU) adds one more drawer.
y Electronic sorting *4 is realized with the Expansion Memory.
Ecological energy-saving design
y The toner recycling system in which used toner is recovered and reused is adopted.
y Its warm-up time has become be approx. 25 seconds.
*5
y The low power mode, which reduces unnecessary electric power by having the fuser unit
temperature lowered while the equipment is left inactive, is adopted.
y The sleep mode, which maintains the smallest possible power consumption during the
equipment’s inactive period after it has not been used within a specified period of time, is
adopted.
*1 These speeds are realized in the non-sort mode, when A4 originals placed in a portrait direction are con-
tinuously copied and the Automatic Document Feeder (optional) is not used.
*2 When this equipment is used as a printer, the co-packed software needs to be installed into your PC.
*3 This is the weight of the equipment itself (without any options).
*4 Electronic sorting is a function to have the copies exit and be sorted into the same page order as that of
the originals in each set.
*5 This is the value when the room temperature is 20 °C or more at rated power input.