Toshiba e-STUDIO166 - Manual (Page 108)

7 SPECIFICATIONS AND OPTIONS
106 e-STUDIO166/206 Specifications
e-STUDIO166/206 Specifications
y These specifications vary depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product
improvement.
Model name DP-1660/2060
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method 2 halogen lamps
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Automatic Document Feeder is installed: Fixed scanning
system by feeding the original)
Original scanning sensor Linear CIS sensor
Scanning light source LED
Resolution Scanning 600 dpi x 600 dpi
Writing 2400 dpi x 600 dpi (Smoothing process)
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3
Acceptable copy
paper size Drawer A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP,
13"LG
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13" LG
Acceptable copy
paper weight Drawer
64 - 80 g/m 2
Bypass
64 - 80 g/m
2
(for continuous feed)
50 - 163 g/m 2 (for single feed)
Warm-up time Approx. 25 seconds
First copy time (A4 portrait) Approx. 7.6 seconds
Continuous copy speed See P.107 “Continuous copying speed”
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width Copy Leading edge: 3.0±2.0 mm, Trailing edge: 2.0±2.0 mm,
Both edges: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edges: 5.0±2.0 mm
Reproduction ratio Actual size 100±0.5%
Zoom
25 - 200% (in 1% increments)
Storage capacity Max. 250 sheets or until the memory is full (TOSHIBA’s own chart)
Paper supply Drawer
250 sheets (80 g/m 2 )
Bypass
100 sheets (80 g/m
2
)
Loading capacity for the receiving
tray
Approx. 250 sheets (64 g/m 2 )
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 7 exposure steps
USB interface USB2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
Power requirements 220 - 240 V±10%, 8 A (50/60 Hz)
Power consumption 1.6 kW or less (including optional equipments)
Dimensions (equipment only) 600 mm (W) x 643 mm (D) x 462.5 mm (H)
Weight Approx. 33.7 kg (equipment including drum)
Space occupied (equipment only) 948 mm (W) x 643 mm (D)