Tektronix Phaser 840 Color Printer 071-0389-00 - Manual (Page 39)

Getting Set Up
Setup Guide 33
Set up the driver
1. From the Apple menu, select Chooser.
2. Click the icon of the printer driver (LaserWriter 8) on the left side of the
window.
3. Click the Zone for your printer, if applicable.
4. From the list of printers on the right side of the window, select your
printer. If it is not in the list, check the hardware connections and
verify that you have selected the correct zone in the Chooser on the left
side of the window.
5. Click Setup/Create to select the correct PPD (PostScript Printer
Description) file.
6. After the automatic setup has completed, click Setup and click
Configure
.
7. Select the options that are installed in your printer (for example,
memory configuration, High-Capacity Paper Tray Assembly, or
internal hard drive); this information can be found on the Startup page.
Setting up the driver allows you to select all printer options when
printing.
8. Click OK.
9. Close the Chooser.