Tripp Lite OMNISMART1400 User Manual
Page 2
USB port enables safe unattended shutdown without data loss during extended power failures, includes USB cable
USB port supports messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery
voltage and battery capacity
USB interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment
PowerAlert UPS monitoring software available via free download from www.tripplite.com
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting
completely locked computers by automatically switching UPS power off and back on again
Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and
overload status
1400VA/940 watt power handling ability supports multiple entry-level PCs, network workstations, point-of-sale terminals, small to medium
business phone systems, audio/video equipment stations and heavily configured home theater systems
Supports hot-swap battery replacement via built-in battery access panel
Compatible with 120V/60Hz applications for USA, Canada, Mexico and more
$200,000
(USA and Canada Only)
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
1400
Output kVA capacity (kVA)
1.4
Output Watt Capacity
(watts)
940
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility
60 Hz
Output voltage regulation
(line mode)
-18%, +8%
Output voltage regulation
(Battery mode)
115V (+/- 5%)
Built-in UPS output
receptacles
6 5-15R outlet(s)
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
9.2A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type
5-15P
UPS Input cord length (ft.)
6
UPS Input cord length (m)
1.8
Recommended Electrical
Service
15A 120V
Input cord length (ft.)
6
Input cord length (m)
1.8