Teac CR-H227I - Manual (Page 39)

39
Press the ENTER button.
The “minute” value blinks.
Press the SKIP buttons to set the current
minute.
Press the ENTER button.
The clock starts from 00 seconds.
5
4
3 Press the TIME MODE button once.
Each time the TIME MODE button is pressed, the
mode is changed as follows:
< When no action is taken for 1 minute, the time
adjust mode will be cancelled.
< Press the STOP button to cancel the time setting.
Press the SKIP buttons to set the current hour. 2
Current time
On time
Off time
Source select
1
Setting the Clock
TIME MODE
SKIP ENTER