Texas Instruments PGA309EVM-USB - Manual (Page 21)

www.ti.com PGA309EVM-USB Hardware Setup
3.6 PGA309EVM-USB Jumper Settings
Figure 14 illustrates the default jumpers configuration for the PGA309_Test_Board. In general, the jumper
settings of the USB-DAQ-Platform do not need to be changed. You may want to change some of the
jumpers on the PGA309_Test_Board to match your specific sensor conditioning design.
Figure 14. Default Jumper Settings (PGA309_Test_Board)
21 SBOU084 – February 2010 PGA309EVM-USB
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated