3 connecting the hardware – Texas Instruments PGA309EVM-USB User Manual
Page 18
PGA309EVM-USB Hardware Setup
www.ti.com
3.3
Connecting the Hardware
To connect the two PCBs of the PGA309EVM-USB together, gently push on both sides of the D-SUB
connectors (as shown in
). Make sure that the two connectors are completely pushed together;
that is, loose connections may cause intermittent operation.
Figure 11. Connecting the Two EVM PCBs
18
PGA309EVM-USB
SBOU084 – February 2010
Copyright © 2010, Texas Instruments Incorporated