Connecting to a tv (continued) – Toshiba SD-370EKE User Manual

Page 24

Connections

Notes

• Refer to the owner’s manual of the connected TV as well.

• When you connect the DVD video player to your TV, be sure

to turn off the power and unplug both units from the wall outlet

before making any connections.

• If you have a HDMI (with HDCP) equipped monitor or display,

you can connect it to this player using a HDMI cable.

• The HDMI connector outputs uncompressed digital video, as

well as almost every kind of digital audio that the player is

compatible with, including DVD-Video, Video CD/Super VCD,

CD and MP3.

• This unit has been designed to be compliant with HDMI (High

Definition Multimedia Interface) Version 1.1 depending on the

component you have connected. Using a HDMI connection

may result in unreliable signal transfers.

• When using HDMI cable, do not connect to other analogue video

• Because HDMI is an evolving technology, it is possible that some
devices with an HDMI input may not operate properly with this DVD
player.

outputs.

• No sound will be output from the HDMI cable if the digital out

is not set to PCM, see page 32.

• HDMI output is only available when the Video Output is set to

• If the TV with HDMI doesn't support DTS output decoding, when playing
DTS CD discs,there will be noise during HDMI output.

“HDMI”. Otherwise the HDMI button is invalid, see page 31.

Content of the output for each output jack is shown in the following table and
differ depending on user setting/operation:

* Settings for HDMI output format are performed using the

HDMI button

on the remote control or

HDMI SELECT button on the front panel.

"Video Output" HDMI Output

HDMI

Video

Component

Setting

Setting *

Output

RGB

Invalid

Composite

RGB

Composite

Invalid

Composite

Component

Invalid

Composite

576i

Composite

(Interlaced)

P-Scan

Invalid

Composite

576p

Composite

(Progressive)

576p

Composite

576p

Composite

HDMI

720p

1080i

Content of output for each output jack

On-Screen Display Setting

Connecting to a TV (continued)