Toshiba SD-370EKE - Manual (Page 21)

Connections
21
To wall outlet
To AV
To SCART input
SCART cable
(not supplied)
Normal TV
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV (Using the SCART socket)
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the
power and unplug both units from the wall outlet before making any connections.
• If your television set has one audio input, connect the left and right audio outputs
of the DVD video player to a Y cable adapter (not supplied) and then connect to
your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video
player to a VCR, TV/VCR combination or video selector, the playback picture
may be distorted as DVD video discs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
Connecting to a TV (Using the phono type jacks)
• Make the following setting.
On-screen display Select: Page
Component
Composite
RGB
P-Scan
HDMI
“Video Output” 31
• Make the following setting.
On-screen display Select: Page
“PCM” or
“Bitstream”
“Digital Output”
“Video Output” Component
Composite
RGB
P-Scan
HDMI
31
32
Normal TV
To audio
input
To video
input
(yellow)
To VIDEO
OUT
(yellow)
To 2ch
AUDIO
OUT
(R: red,
L:white)
Audio/Video cables (supplied)
To wall outlet