Teac X-01 - Manual (Page 17)

17
ENGLISH
Settings (introduction)
Turn on the main unit. 1
Press the SETUP button to enter the setup menu. 2
“AudioSetup” appears on the front panel display.
< In this manual, factory settings are marked with an asterisk
“*”.
< Although it is possible to enter the setup menu while
playback is continuing, not all menu functions will be
available. Expand the number of available functions by
pressing the STOP button.
< Exit the setup menu by pressing SETUP once again.
Use the cursor buttons to navigate the menus. 3
When a option marked with “>” is displayed, use the up
or down cursor buttons to change the setting, and press
the ENTER button to confirm the entry. 4
Exit the setup menu by pressing SETUP once more. 5
< Refer to the Setup Menu Chart on the next page.
< The options you can change are marked with “>”.
< Use the left and up cursor buttons (or the RETURN button) to
go back a level in the setup menu.
< When a numerical value (such as speaker distance) is
changed, the value is confirmed without pressing the ENTER
button.
< Individual menu functions are described on page 19 and 20.
< Repeat steps and as required. 4 3