Teac X-01 - Manual (Page 14)

14
Programmed playback
Programmed playback allows up to 30 tracks to be played
back in the order you decide.
Press the PROGRAM button (either when playing back
or stopped).
If a track is currently playing back (or paused in the middle of
the track), this track is added as the first item in the
programmed playback list.
1
Use the number buttons to add tracks to the
programmed playback list. 2
Use the +10 button and 0 through 9 buttons in exactly the
same way as when selecting tracks.
Continue pressing the number buttons to add tracks.
< Clear mistakes with the CLEAR button (the last entry is
cleared)
< You can only select tracks on the disc (in other words, if the
disc has six tracks, you cannot program track 7!).
Finish the programming by pressing PLAY.
Programmed playback begins (if the disc is actually being
played back while you are setting the program order, there’s
no need to press PLAY).
3
Skip between tracks in the programmed playback order using
the SKIP buttons (.//).
Clearing the last track from the list
Push the CLEAR button to clear the last track from the list.
Adding tracks to the list
Use the number buttons to add tracks to the list.
Clearing the whole program
Press the PROGRAM button to clear the program (playback
continues from the current point).
The OPEN/CLOSE or the POWER button also clears the
program.
Track number Number in programmed list