TOA Electronics LG LX290 - Manual (Page 45)

2B. Settings 33
S
e
tt
in
g
s
To set your phone always to vibrate in addition to any
ringer settings:
1. With the phone open, press the volume button up or
down in standby mode until a volume setting
appears on the screen.
2. Press VIBRATE (left softkey) to check the Vibrate On
option. (If you have already checked the option,
pressing
VIBRATE deselects it.)
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ With the phone open, press and hold the volume
button down in standby mode. (The screen will
display “Silence All.”)
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a
volume level.
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a voice
call, or when a call has been connected, and/or when
the signal fades or a call is dropped.
1. Press > Settings/Tools > Settings > Sounds > Alerts .
2. Select Beep Each Minute , Out of Service , Connect , or
Signal Fade/Call Drop and press .
3. Press ON or OFF (left softkey).
Selecting a Key Tone
Your phone offers a number of options for selecting the
audible tones accompanying a keypress.
1. Press > Settings/Tools > Settings > Sounds >
Keytones.
2. Highlight an option and press .
Ⅲ Tone Length to select a key tone length. (Longer
tone lengths may be better for tone recognition
when dialing voicemail or other automated
systems.)
Ⅲ Tone Volume to select a keypress volume level.