Toshiba SD-P7000 - Manual (Page 22)

22
TV Operation
Channel Menu Options
Memorizing the Channels with
Auto Scan
Press the SET UP button and then use the D D / E E buttons
to select the Channel menu.
1
- For Auto program to work, the programming source must be
connected to the TV and the TV must be receiving
programming signals either over-the-air or from a
cable-type service provider.
Press the G G button and then use the D D / E E buttons
to select Auto Scan .
2
Press the G G button to begin the channel search.
• Wait for auto program to complete the channel
search cycle before choosing a channel. The
TV scans for over-the-air channels and then
channels provided by a cable service.
3
Channel
To start Auto Scan
Manual prog.
Favorite ch.
TV/Cable
F G ENTER SETUP D
E
Note:
• When the channel search is complete, use the
D D / E E
buttons to review the memorized channels.
• If you press the ENTER button in auto programming, the
function will stop and only channels programmed up to
that time will remain.
• Auto program function can memorize only the channels
which are being received at that time.
Channel
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
F G ENTER SETUP D
E
SET UP
D D / E E, F F / G G
ENTER
Antenna Setup
Press the SET UP button and then use the D D / E E buttons
to select the Channel menu.
1
Press the G G button and then use the D D / E E buttons
to select TV/Cable .
2
Press the G G button and then use the D D / E E buttons
to select TV or CATV.
3
Channel
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
F ENTER SETUP D
E
Channel
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
F G ENTER SETUP D
E
Press the ENTER button to save. 4
TV
CATV