Tyco Ethernet Communication Module ECM - Manual (Page 2)

Physical
Size 140 x 110 x 35mm (5.5 x 4.3 x 1.4”)
Weight 0.2Kg
Housing Plastic enclosure or PCB only
Housing colour Beige
Power
- Voltage
12Vdc
- Current 250mA (excluding reader)
Consumption
Environmental
Temperature
-10°C to 55°C
LED Indicators +12 Volts Power
RS485 Rx and Tx
Tibbo LED Indicators
Ethernet 100BaseT
Ethernet Link
Status Red
Status Green
Functionality
Inputs 10/100MB Ethernet via RJ45 connector
Outputs
RS232 via DB9 connector
RS485 via 2 part screw terminal
Reader Power Output 12V, limited to 750mA (MAX) to power a
single CEM reader. Excludes lock power
Configuration Configurable via Device Server Toolkit,
telnet or serial connection
communication interFace
To Host 10/100 Base-T TCP/IP using CAT5/6
Unshielded twisted pair Cable
Connection RJ45
To RS485 Card Reader RS485 multidrop cable runs using using
Belden 8723 with maximum length of
1.2km without repeater
Connection 2 part screw terminal
Product codes
ECM/200/000 ECM (Complete with PSU and Enclosure)
ECM/200/B04 ECM Board Only Module
(For use in CEM legacy Systems)
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: [email protected]
www.cemsys.com
PRODUCT HIGHLIGHTS
CEM/B/052
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.
technical sPeciFications
serial reader/device compatibility on an iP system
The ECM improves communications by enabling traditional serial
card readers/devices to be quickly and easily connected to an
IP-based Ethernet network. A board only option is available to
connect into a NCN device in an existing CEM legacy system.
rs485 network compatibility
A single ECM can be connected to a chain of up to 16 RS485
readers and multi-dropped up to a distance of 1.2KM.
system compatibility
The ECM can be used with the AC2000 SE (Standard Edition) or
the AC2000 Lite access control systems.
Packaging options
The ECM is supplied as a standalone boxed unit. A board only
option is available to connect into a NCN device in an existing
CEM Legacy System.
Windows configuration
The ECM makes use of a Tibbo Ethernet module for connection
to the Ethernet network. Tibbo supply a simple Device Server
Toolkit (DST) application for setup and network configuration.
Sample configuration files for standalone and legacy (ENCN)
modes of operation are supplied.