Trimble Outdoors 132 - Manual (Page 72)

5 Configuring the Receiver
7 2 DSM 132/132RS Receiver User Guide
EZ Bcn screens
The EZ Bcn 0 and EZ Bcn 1 screens use information in RTCM SC-104
broadcasts to create a list of beacon stations that are within range of
the receiver. Use these screens to manually select frequencies for
Beacon Channels 0 and 1:
1. Navigate to the EZ Bcn 0 screen.
2. Press 3 to select the field for Beacon Channel 0.
3. Press 2 or 1 until the required beacon station appears:
4. Press 4 to save the changes.
5. Press 2 to display the EZ Bcn 1 screen.
6. Repeat Step 2 through Step 4 to select the station for Beacon
Channel 1.
Manually selecting frequencies
Note – Use this method only if you cannot find the required
radiobeacon name in the list.
To manually select Beacon DGPS radiobeacon frequencies using the
EZ Bcn screens:
1. Navigate to the Man Bcn Freqs screen.
2. Press 3 to activate the cursor in the Beacon Channel 0 field:
3. Press 2 or 1 to enter the frequency one number at a time.
Press 3 to move to the next digit.