Trimble Outdoors 132 User Manual
Page 71
DSM 132/132RS Receiver User Guide 7 1
Configuring the Receiver 5
5.
Press
3 to activate the cursor. Press 2 until the required
beacon mode appears. See Table 5.7.
6.
If you selected:
–
Auto Range Mode or Auto Power Mode, configuration is
complete. Press
5 several times to return to the Home
screen.
The receiver automatically detects the two closest or two
most powerful beacons.
–
Manual Freq Mode, see EZ Bcn screens, page 72, or
Manually selecting frequencies, page 72
–
Disabled Mode, the receiver ignores incoming
RTCM SC-104 messages and operates as a GPS-only
receiver.
Table 5.7
Beacon modes
Mode name
Description
Auto Range mode
Reads the incoming RTCM SC-104 message
stream and selects the two closest
radiobeacons within range of the AgGPS
receiver. The closest radiobeacon is
automatically assigned to Beacon DGPS
Channel 0, and the second closest is assigned
to Channel 1.
Auto Power mode
Detects the signal strength of the two most
powerful radiobeacons within range of the
DSM 132 receiver. The most powerful
radiobeacon is automatically assigned to
Beacon DGPS Channel 0, and the second is
assigned to Channel 1.
Disabled mode
Disables DGPS and forces the DSM 132
receiver to operate in GPS mode only.
Manual Freq mode
Disables the automatic selection of
radiobeacons so that you can manually select
the frequency of radiobeacons for Channel 0
and 1.