Trimble Outdoors 132 User Manual
Page 48
4 Getting Started
4 8 DSM 132/132RS Receiver User Guide
Table 4.2 explains the indicators that can appear in the Position Type
field.
Note – The “/” symbol in the position type spins when the receiver is
operating correctly.
Satellite DGPS mode status indicators
When the receiver is in Satellite mode, the second line of the Home
screen displays the status indicators shown in Figure 4.10.
Figure 4.10
Satellite DGPS mode status indicators
Table 4.2
Position types
Display
Description
SRCH
Searching for satellites.
TRCK
Tracking satellites.
G/2D
Outputting 2-dimensional autonomous positions.
G/3D
Outputting 3-dimensional autonomous positions.
D/2D
Outputting 2-dimensional differential positions.
D/3D
Outputting 3-dimensional differential positions.
S 1556.2550 ÷ø10
Receiver is using Satellite DGPS corrections.
Frequency for tracked DGPS satellite. Available
frequencies vary according to your location and
DGPS service provider.
Signal-to-noise ratio of DGPS
signal, see Table 4.4