Tandberg Data FS-1610 - Manual (Page 6)

Tandberg Data Overview
_____________________________________________________________
1-2 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.2. Features of Viking FS-1600 Series NAS
Appliance
The Viking FS-1600 Series Network Attached Storage appliance is a
powerful rack-mountable system that offers a new standard for flexible
management and monitoring networked attached storage by the network
administrators. The hardware features include the followings:
• Processor:
o
Viking FS-1600 uses dual 771-pin LGA Sockets that
supports 2 x 64-bit Dual-Core Intel
® Xeon ® 1.60 GHz
processor with 1066 MHz FSB and 4MB L2 Cache (5110)
o
For Viking FS-1610 uses dual 771-pin LGA Sockets that
supports 1 x 64-bit Quad-Core Intel
® Xeon ® 2.00 GHz
processor with 1333 MHz FSB and 12MB L2 Cache (E5405)
• Intel 5000V (Blackford VS) chipset
• 2 x Intel® (ESB2/Gilgal) 82563EB Gigabit Ethernet Controller which
supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
with Intel® I/OAT for fast, scaleable, and reliable networking
• Memory:
o
6 x 240-pin DIMM socket that accept a maximum memory
capacity of 16GB 667 / 533 MHz DDR2 ECC FB SDRAM
modules (Memory modules must be populated in pairs)
o
Default RAM configuration for FS-1600 is 1GB and FS-1610
is 2GB
• Expansion slots:
o
1 x (x8) PCI-e slot
o
1 x (x4) PCI-e slot (using x8 slot)
o
2 x 64-bit / 100 MHz PCI-X (3.3V) slot
o
1 x 32-bit / 33 MHz PCI (3.3V) slot
• RAID:
o
FS-1600 uses Areca ARC-1160 Serial-ATA II RAID
controller with 256MB RAID cache which supports RAID
level 0, 1, 0+1, 3, 5 and 6 (consume one PCI-X slot)
o
FS-1610 uses Areca ARC-1261ML Serial-ATA RAID
controller with 256MB RAID cache which supports RAID
level 0, 1, 0+1, 3, 5 and 6 (consume one x8 PCI-e slot)
• Storage support for:
o
Up to 16 x hot-swap Serial-ATA II hard-drive bays
o
Up to 16 x hard-drive with RAID configuration
• Front control panel
o
Power button
o
Reset button
o
1 x Fast UART 16550 serial port
o
2 x USB 2.0 port