Distinctive ringing, Hold, Exclusive hold – Toshiba DKT3001/2001 User Manual
Page 24: Consultation hold, Distinctive ringing hold, Exclusive hold consultation hold

The Basics
Distinctive Ringing
12
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02
Distinctive Ringing
1. Press
to enter User Programming Mode.
2. Press a
/LQH
button. The Line LED is steady green.
3. Enter the ringing pitch number for incoming trunk calls:
= Low,
= Middle,
= High,
= Combination
4. Lift the handset to return to idle.
❐
DKT2001: This feature does not work.
Hold
➤
To place a call on hold, press
+ROG
. Your LCD shows the line on hold. The held
Line’s LED flashes while appearances of the line at other stations flash red.
•
To return to the held call, press the held
/LQH
.
•
If you do not return to the held call within a specified time, it rings back to your
phone. The call remains camped-on to your station indefinitely.
•
If the held party hangs up, the call is released.
Note
See the Call Pickup section to pick up a call on hold from another extension.
Exclusive Hold
This feature enables you to place a call on hold so that only you can retrieve it.
➤
While on a call, press
+ROG
twice. That line’s LED flashes while appearances of
the line at other stations are steady red (in use).
Consultation Hold
➤
You place the call on hold by pressing
&QI7UQ
, then dialing another line, talking
on that line, then transferring or going back to the held call by pressing its
/LQH
button.