3 configuring upnp on the thomson gateway, Introduction, Enable/disable upnp – Technicolor - Thomson 585 v7 User Manual
Page 34: Extended security, Enabling extended security, Configuring upnp on the thomson gateway
E-DOC-CTC-20080118-0003 v1.0
28
4
Getting the Most Out of Your Thomson Gateway
4.1.3
Configuring UPnP on the Thomson Gateway
Introduction
On the
you can:
Enable/Disable UPnP
Proceed as follows:
1
Browse to the
.
2
On the Toolbox menu, click Game & Application Sharing.
3
Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4
Click Apply.
Extended Security
If Extended Security is enable only limited UPnP operation between the host and the Thomson Gateway is
allowed. A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You
can then only connect/disconnect the Internet connection on the
Enabling Extended Security
Proceed as follows:
1
Browse to the
.
2
On the Toolbox menu, click Game & Application Sharing.
3
Under Universal Plug and Play, select Use Extended Security.
4
Click Apply.