2 manual installation, Procedure, Connect the cables – Technicolor - Thomson 585 v7 User Manual
Page 15: Configure the thomson gateway, Manual installation, 1installation 1.3.2 manual installation
E-DOC-CTC-20080118-0003 v1.0
9
1
Installation
1.3.2
Manual Installation
Procedure
Proceed as follows:
1
2
Connect the cables
Proceed as follows:
1
Connect your computer to the Thomson Gateway as described in
“3.1 Adding a Computer to your
2
Connect the Thomson Gateway to the DSL line.
3
Connect the power supply.
4
Turn on the Thomson Gateway.
Configure the Thomson Gateway
1
Open your web browser.
2
The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
If this window does not appear browse to
to the IP address of your Thomson
Gateway (by default:
) and click Thomson Gateway on the menu on the left-hand side.
3
Click Setup my Thomson Gateway.
4
The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson
Gateway. Click Next and follow the instructions.